Ghost Immobiliser Fitter
Ghost immobilisers are among the most effective ways to protect your vehicle from thieves. They prevent vehicles from getting started unless the correct code is entered. They can be used to remotely track a vehicle. They are becoming increasingly popular and a lot of insurance companies offer discounts to drivers with these systems.
It is tamper proof
The Ghost Immobiliser is a sophisticated security device, prevents your vehicle from being started without a unique pin or beacon. The system is discreet and can be customised to suit your vehicle which makes it a highly effective anti-theft solution. After installation, it's important to test the system to make sure that it's working properly. Entering the PIN while starting the engine is a simple method to verify that the system is installed correctly. Regular testing will reveal any problems or issues with the system as quickly as possible.
The system communicates with the ECU to stop your car from running unless the proper sequence is entered. You can do this by using the electronic buttons that are located on your steering wheel or by using an app on your smartphone. The tamper-proof design and the low profile makes it difficult for thieves to locate or remove. It can be used in combination with a beacon for monitoring the location of your car. It is an excellent option to safeguard valuable vehicles that have been modified, or for people who want to protect their expensive or valuable automobiles.
This tamper-proof device utilizes the buttons of your steering wheel to generate an exclusive sequence only known by you. The sequence is mathematically difficult for thieves to guess and can be changed easily by using a reset code. It can be easily installed by a technician on the majority of automobiles.
After installing the device, you'll have to connect it to a power source as well as a grounding point. To identify the wires required to connect it, get the wiring diagram for your vehicle. To avoid short circuits or electrical damage, cover the connections with heat-shrink tubing or insulation. Also, you should check the connections and mountings for any signs of tampering caused by thieves.
The Ghost 2 immobiliser cost can also be set to Service/Valet for older vehicles that require the battery isolation to perform servicing or maintenance. This will turn off the device using an individual pin code, stopping it from being re-activated by thieves.
Wireless
In contrast to other anti-theft devices ghost immobilisers operate in a quiet manner and cannot be recognized by thieves. They can be put in a variety of vehicles and shield them from hacking, key cloning, and signal relay attacks. They can also be used to remotely track a vehicle. They can provide owners with instant notifications when their vehicle is stolen. Some insurance companies offer discounts for customers who install them. It is the most effective method to stop car theft.
The Ghost II immobiliser offers a simple and affordable way to safeguard your car from theft. This discreet device works wirelessly and is compatible with most vehicles. It is weatherproof and tamper-proof and is compatible with any vehicle. It also comes with a 3-year warranty. In contrast to other security devices, Ghost II is not a security device that Ghost II does not require any additional wiring or external components. Its unique pin code sequence safeguards your car from key theft and key cloning by blocking the engine from starting without a disarm code is entered. This sequence can range from one to 20 buttons, meaning that thieves will need to invest much more time trying to crack the code before they can drive away.
Another advantage of the Ghost II is its ability to block signals from a burglar's key fob. It can tell if the key fob is hack or copied, and then disable the engine with an alarm. It also can stop the use of the signal relay device which is often used by organised car-thief groups to gain access to a vehicle.
It is essential to regularly test the Ghost Immobiliser to make sure that it is functioning properly. This will enable you to identify any problems early and address them before they become serious. As part of your regular check-up of your vehicle, it's recommended to test the system. Enter the PIN code into the system, and then turn on the engine.
It is important to mount the immobiliser in a concealed area, so that it is difficult for thieves to gain access. If possible, hide the unit behind your dash with cable tie. Make sure that all connections are properly insulated and won't be tampered with by thieves. Double-check that the mounting location is secure.
It is compatible with many vehicles.
The ghost immobiliser is a highly effective security device that can help prevent car theft. It works by blocking the engine of your car from starting until the proper pin code is entered. This code can be created by pressing a set of buttons already present on your steering wheel, door panel or centre console. The immobiliser can be programmed at any time by the owner. It is tamper-proof. It also protects from key-cloning, hacking and other malicious activities.
While some drivers might try to install the Ghost Immobiliser on their own, it is recommended that you work with an expert. This is because the process of installation is complicated, and mistakes can render the device useless or even damage your vehicle. DIY installation may also invalidate the warranties of both your Ghost Immobiliser and your vehicle.
The wiring diagram for your vehicle model is the best place to start. This will provide a roadmap to locate the CAN H and L wires, which are the connections to the immobiliser. Once you've identified these wires, mark them to ensure that they're not accidentally disconnected during the installation process. Choose a safe and reliable grounding point.
It is a good idea to test the immobiliser once the wires have been connected to ensure that everything is working as it should. Enter the PIN code and start your engine to determine whether everything works. It is recommended to test the immobiliser on a regular basis to ensure that it functions in the way it was intended to.
Another benefit of the ghost immobiliser is that it does not require LED indicators or key fobs it can be disarmed by entering a unique sequence of buttons on your steering wheel, door panel or centre console. The immobiliser is also tamper-proof and does not leave any evidence of its installation, making it difficult for thieves to locate or disarm. It can be used to increase the security of your vehicle in the event of an intrusion. Many insurance companies recommend it.
It is simple to install
The Ghost immobiliser is an sophisticated device that helps keep your vehicle safe from even the most skilled thieves. It stops your vehicle from starting until a unique PIN or sequence is entered with the key fob. This prevents cloning, hacking and even key theft, which means thieves cannot drive away your vehicle. It also makes use of a variety of other sensors to detect attempts to drive away and alert the owner or the police in case of any tampering.
Installing a Ghost Immobiliser can be difficult, especially for those who have never installed alarms or security systems before. Having the appropriate equipment and materials is essential to an effective installation. A multimeter is helpful for confirming electrical values. Insulation cables and cable ties are also useful for protecting connections. The user's manual for the Ghost immobiliser gives specific advice tailored to your vehicle's model and wiring.
It is important to examine the locations of the wires for CAN H and L during the installation to ensure precision. They are crucial to power the immobiliser. Any errors could lead to malfunctioning or failure of the system. Label the wires with tape or labels so you can track them. You should also determine the source of constant 12V and a grounding.
Once you've found the proper location, it's time to begin to assemble the ghost immobiliser. First, you'll need to disconnect the battery to avoid short circuits and airbag deployments that could happen. The next step is to connect the wires. Make sure you follow the instructions in the user guide to ensure a safe and secure installation.
After you've completed the wiring, connect the Ghost immobiliser using CAN to the engine control unit. This will make it difficult for thieves to take away or disable the device since it's directly connected to the control unit. It's also tamper-proof, and the only method to disable it by entering the pin code is to enter a personal pin. The pin code will only be used by the owner of the vehicle as well as the installer.
You can also use the Ghost immobiliser as a temporary solution to allow another person to drive your car for a short period for instance, when you're out of town to work or require a service. This feature is called Service/Valet mode, and you can activate it by using a mobile app or the key fob.